Product introduction
This product is a composite additive developed mainly for the blackening of molds after use in the production process of EVA injection. This product can effectively inhibit the precipitation and deposition of small and medium molecules of EVA, and at the same time improve the activity of EVA formula, improve the fusion between organic and inorganic, so as to prevent or delay the blackening of the mold. This product can also improve the regularity of the product, so that the product is beautiful. And the product is non-toxic and environmentally friendly, no side effects.
Product index
Usage method
In order to ensure the full effect, it is recommended that the refiner or screw mixing use, directly in the formula to add 4-5phr. At the same time, the whole formula in the main material is properly adjusted, so that its multiplication rate to meet the requirements. Please increase or decrease the amount according to the foaming multiplication rate and actual requirements.
Effective display
Other effects:
1）After adding 3PHR AT-2323E directly in the same formula, the cold and hot shrinkage is reduced by 5MM.
2）After adding 3PHR AT-2323E directly into the same formula, the activity of the whole material is increased, and the time of adding sulfur can be reduced by 30 seconds.
Package specification/ shelf life
Packing specification: 25kg/bag
Shelf life: twelve months from the date of production. If the storage expires, it can still be used after re-inspection.
Attention points
1. This product is flammable
2. Store away from strong acids and alkalis and non-polar oils.
3. Store in a ventilated and dry place
